8. 3. 2 Check
8. 3. 2. 1 Check of wheel disk wobbling
Turn the rear wheel manually and measure eccentricity with a
micrometer gauge.
Allowable limit
Longitudinal direction: replacing in case of exceeding 2. 0mm
Horizontal direction: replacing in case of exceeding 2. 0mm
If the rear wheel wobbling exceeds the allowable limit, the rear
wheel bearing is loosened, consequently the rear wheel wobbling.
Replace the rear wheel bearing after check.
8. 3. 3 Installation
Install the rear wheel in reverse sequence of disassembly and lock the nut.
Fixing nut, rear wheel
Torque force value : 85-98N·m
QJ200-2A Rear wheel
Comments to this Manuals