* Attention
While removing filter element of air cleaner, please do not run the engine, in case unfiltered air
comes into the engine, which may result in fast wear of some components or damage the engine.
On the other hand, rotation of engine without filter element may affect the carburetor and the
carburetor will not work normally afterwards, which may result in overheated engine. Install filter
element guide, filter element, air cleaner housing cover, stop valve assembly and left protecting
plate.
Spark plug
Disconnect lead wire of spark plug cap.
Remove spark plug with a spark plug wrench or equivalent tool.
Inspection
.If the insulator is cracked or damaged;
.If electrodes are worn;
.Combustion condition and color
—Light grey color means excellent combustion condition.
—Pale color indicates that ignition system fails or lean
fuel/air mixture.
—Wet appearing or dark carbon deposition means higher
fuel/air mixture.
If the above-mentioned appears, please remove them with
spark plug cleaner or wire brush. If necessary, replace the
spark plug.
Visually inspect the spark plug.
If the insulator is cracked or worn, please replace it with a new one.
Spark plug clearance inspection.
Clearance: 0.6-0.7mm
* Attention
Reinstall the spark plug into the cylinder head and tighten it with the specified torque.
Tightening torque:18N.m
Screw the spark plug into the cylinder head first with a hand, and then tighten it with spark plug
wrench.
Comments to this Manuals