Zhejiang Qianjiang Motorcycle RKV 200 Service Manual download pdf (Page 7)

Maintenance Regulations

While repairing and servicing, try to use tools of metric system as possible as you can. Incorrect

tools may damage the motorcycle.

Before take down or open protecting plate for maintenance work,

please clean the dirt on external surface of the component or the

assembly to prevent the dirt from falling into the engine, chassis or

braking system.

After disassembly and before measuring friction, please clean the

components and purge with air compressor.

Plastic parts may deteriorate due to aging, which are apt to be

damaged by solvent or oil. Check before re-installation and replace

if necessary.

While removing a component with many assemblies, do from outside

to inside. Loosen firstly smaller assemblies; for the complicated

assemblies, such as gearbox, keep them in a proper assembling order

for the sake of easy assembly later.

Pay special attention to the key fitting position before disassembly.

The components that are not used any more shall be replaced on time

before disassembly.

1 2 3 4 5 6 7 8 9 10 11 12 ... 170 171

No comments

Zhejiang Qianjiang Motorcycle RKV 200 Service Manual Page 7